Phase Dynamics PPM Water-Cut Analyzer raises the standard in innovation. The PPM Analyzers are highly sensitive real-time instruments developed specifically for use in the oil industry to measure parts per million moisture levels in hydrocarbon liquid.
Typical applications requiring ppm measurement capability include:
The product line is based on the innovative sensing technology of oscillator load-pull. As the mixture of flowing liquids passes through the measurement section, the oscillator senses the entire cross section of the material and instantaneously shifts in frequency as the material composition changes. This frequency shift is a direct measure of flowing material change within the measurement section.
The product family is customizable to meet the exact needs of the global market. The typical system includes the Measurement Section, an Electronics Enclosure, a Coriolis flow meter, a molecular sieve, interconnecting valves, tubes, and system cables.
PPM Analyzer System
Measuring Range
The Analyzer measurement range is listed in the table. Uncertainty is expressed as a two standard deviation confidence interval.
| Parameter | Range |
|---|---|
| Measuring Range | 0ppm to 1,000ppm |
| Uncertainty (2σ) | F+/-20ppm |
| Repeatability | +/-10ppm |
| Resolution | 1ppm |
This family of Analyzers are available with the following certifications:
In addition to the certifications, several additional reports are available.
Workmanship and material standards include these items:
The Measurement Section is the portion of the Analyzer that contains the sensing elements where fluids are flowing at process conditions. Process temperature capabilities are 0 to 104ºC.
The Electronics Enclosure Section contains the majority of the electronics with displays and user I/O. Ambient temperature capability is -40ºC to +60ºC.
The Measurement Section is configured in a “Z” configuration with 1/2 inch Swagelok tubing fittings. Standard material is 316/316L stainless steel with other options available. Maximum operating pressure is 3,000 PSI. Process temperature is monitored with a built-in RTD sensor. A flow rate of 3 to 7 liters per minute is suggested. Pressure drop across the measurement section is less than 10 PSI.
The Measurement Section is configured in a “Z” configuration with 1/2 inch Swagelok tubing fittings. Standard material is 316/316L stainless steel with other options available. Maximum operating pressure is 3,000 PSI.
Process temperature is monitored with a built-in RTD sensor. A flow rate of 3 to 7 liters per minute is suggested. Pressure drop across the measurement section is less than 10 PSI.
Touchscreen Display
System power is supplied through either 100 to 240 Vac or 24 Vdc. Typical power dissipation is 18 Watts, maximum power dissipation is 33 Watts.
The data interface includes MODBUS, HART, analog I/O, pulse input, and alarm relays.
The Enhanced Electronics package option includes:
The Expanded Electronics package option includes:
Density and Flow parameters are available for display and output through the data interface ports.
Documents
Price quotations for the PPM are based on the information provided in the Application Submission Sheet.
– Please fill-in this form and email to [email protected]